Electrical Engineering Jobs

I am looking for an experienced Verilog developer who can work on my Verilo HDL project. Design a digital circuit for a fruit sorter based on following specification. Develop the block diagram (consists of datapath and control units) and the ASMD chart. Assume that there is a 1-bit RESET signal to reset the circuit and it is asynchronous and active low. In addition, there is a 1-bit CLOCK as the clock. The circuit will start the operation when a 1-bit input signal START is asserted. A fruit detector provides a 1-bit input FRUIT that becomes 1 for one clock cycle if banana is detected and the FRUIT signal will be 1 for two clock cycles if orange is detected. There are 2 different outputs which are OUT1 and OUT2 that will be 1 for one clock cycle for the type of fruit where...

I'm looking for an experienced X-ray engineer to assist with the installation and calibration of the Drx Evolution X-ray system. Key Responsibilities: - Installation and Calibration: You will be responsible for the physical installation and calibration of the Drx Evolution X-ray system. Prior experience with the specific brand/model is a must. Key Requirements: - Specific Equipment Experience: Please only apply if you have hands-on experience with the Drx Evolution X-ray systems. - Remote Assistance: The project will be conducted remotely, so you should be comfortable with providing support from a distance. Ideal Candidate: - Previous experience with X-ray equipment installation and calibration. - Familiarity with the Drx Evolution X-ray system. - Ability to work independently an...

I need an expert in hardware analysis who can assist in identifying a SOIC-8 flash memory chip within a printed circuit board. The central concern of this project is: • Identification of a low-capacity memory chip, up to 1MB. The ideal candidate should have: • Comprehensive knowledge and skills in hardware analysis. • Experience in identifying and differentiating SOIC-8 flash memory chips of varying capacity. • The ability to provide precise and effective results within a reasonable period. Your bid should include a complete analysis report, detailing your methods and confirming the identity of the memory chip. As part of the deliverables, please include tangible proof verifying the chip's capacity.

I'm looking for a professional who can design custom PCBs for interconnecting multiple PCBs. Key Specifications: - The board should have a custom form factor that allows it to fit into a specific enclosure. - It should maintain high signal integrity for communication between the connected PCBs. - Must conform to PCIe 3.0 Standards Ideal Skills: - Extensive experience in PCB design, specifically high density interconnects. - Proficiency in designing custom form factor PCBs. - Knowledge in ensuring signal integrity in high-speed applications. - Familiarity with the required standards for interconnecting multiple PCBs.

I am seeking a highly skilled and experienced electronics engineer who can develop a wireless multimeter using the ESP32 module. This device should possess the functionality to measure voltage, current and resistance with a high degree of accuracy. Key Features: - Voltage Measurement: The multimeter should provide accurate voltage measurements. Experience with similar projects is desirable. - Current Measurement: The multimeter should also be designed to accurately measure current - previous experience with this feature is necessary. - Resistance Measurement: The device must measure resistance without error. A strong background in this area is required. The output from these measurements should be conveniently displayed on a mobile app. For this, I need a developer with experience in wi...

I'm working on a microgrid project and I need a skilled professional to assist me in implementing distributed secondary control using Simulink. I want you to simulate this project in Matlab Simulink. I will need the simulation files as well. - The main purpose of the project is to ensure the stability and reliability of the microgrid through an effective distributed secondary control mechanism. - The microgrid comprises of Solar PV, Generator, and a Battery storage system. - The primary power quality issues that require addressing are related to voltage and frequency. - I'll need you to explain the project design once you are done on zoom call or something as I need to write my thesis on this so I'll need know all the details about the project. Ideal skills and experie...

Looking for an experienced embedded systems developer to assist with bringing an existing prototype to market. More information will be provided on request but broadly speaking current prototype is based on a series of ESP32 modules using ESP-IDF. We're seeking a developer/engineer experienced in PCB design and firmware development on the ESP32 platform with particular experience on fine-grained optimisation of memory management.

On this project, I am on the lookout for an exceptional PCB designer who is well-versed in using Eagle software. Key specifications include: - Designing a basic PCB, involving only a few components. - Adhering to specific dimensions that I have on my list. The ideal candidate should have experience in: - Using Eagle for PCB design - Creating designs conforming to specified dimensions - Working with basic PCB layout and components Please bid if you have a proven track record in these areas and are ready to dive in. I am excited to collaborate with you on this important project.

I am seeking an experienced developer to convert my current image processing project, coded in C++, into Verilog and run on FPGA device using HLS Vitis. The existing project has: - Edge detection capabilities - Image segmentation capabilities The primary goal of this project is not to enhance or alter the images, but to convert the existing codebase from C++ to Verilog, utilizing HLS Vitis. With your expertise: - Maintain the integrity of the current functionalities during conversion - Reframe the C++ code to Verilog language ensuring a seamless running on an FPGA device. The successful bidder should have significant experience with Verilog, C++, and HLS Vitis, as well as a good understanding of Image Processing algorithms, especially Edge Detection and Image Segmentation. The final o...

As the owner of a 14,000 sq. ft retail store, I am seeking a skilled HVAC engineer to design a suitable HVAC solution. Since our store is located in an area that experiences variable climatic conditions throughout the year, the HVAC system should effectively address these seasonal changes. - Existing system: Currently, we have a central HVAC system installed. The new design should take this into account and either build upon the existing system or offer a better alternative, depending on the conclusions of your assessment. - Skills and Experience: The ideal candidate should have significant experience handling HVAC designs for retail spaces, particularly those operating under variable weather conditions. A deep understanding of load calculations is crucial, as this will directly impact ...

I'm in need of an experienced MATLAB expert to handle some electrical simulations. The task at hand includes: - Conducting electrical simulations: The project requires you to simulate electrical systems using MATLAB. This will involve running the simulations, analyzing the results, and providing insights based on the findings. This job is ideal for someone with a strong background in electrical engineering, MATLAB, and simulation techniques. Experience with similar projects in the past would be a big plus.

Please Sign Up or Login to see details.

I'm looking for a professional programmer who specializes in IC programming, specifically for smoke detectors. Key Tasks Include: - Reading and writing IC data for smoke detectors. - Handling and operating microcontroller IC chips effectively. The ideal candidate should have: - Solid experience in IC programming. - In-depth knowledge of microcontroller IC chips. - An understanding of smoke detector systems is a plus. Knowing how to troubleshoot and debug chips will offer a huge advantage. Please respond with examples of related projects you've completed and your approach to tasks like this.

I'm currently renovating a residential property that's under 1,000 sq ft. I'm seeking a professional engineer who can provide me with expert guidance and plans for the renovation. Specifically, I need your expertise in: - Foundation and Structural Area: I'd need you to assess the current structure, ensure it's sound and make recommendations for any necessary changes. - Electrical Systems: Help me design an efficient, safe electrical system for the property. - Plumbing and HVAC: Assist with the planning and implementation of plumbing and HVAC systems. Ideal candidates for this project should have experience in residential projects, particularly in renovation, and be familiar with local building codes and regulations. A good understanding of cost-effective yet qua...

I'm in urgent need of an expert to help with Arduino and SNMP integration for my IoT project. Key Requirements: - Immediate Assistance: I require someone who can start work right away and assist me in getting this integration up and running as soon as possible. - Arduino Expertise: You must be well-versed in programming and working with Arduino boards. Please provide details of your experience working with Arduino and integrating SNMP for IoT in your proposal. Prior experience with remote control and configuration of Arduino devices is highly desirable.

I'm looking for a skilled professional to simulate & test of my microcontroller based hardware design, using proteus and test its performance. Also, if there is any performance bugs, need to correct it and also, build pcb prototype and physically test the performance

I am in need of an experienced electronics and electro mechanics professional to assist with building a digital textile printer tailored to our specific requirements. Key Project Details: - **Print Size:** The final print does not require high resolution and can look pixelated. - **Printing Speed:** The printer should operate at a medium speed. - **Fabric Type:** Primarily, the printer will be used for printing on cotton fabric. Ideal Candidate: - Proficient in electronics and electro mechanics. - Prior experience in building digital textile printers is a huge plus. - Understanding of printing on fabric materials, particularly cotton. - Ability to optimize the printer for medium speed without sacrificing quality. Please bid if you have relevant experience and can offer a tailored soluti...

The goal of this project is to design and create a circularly polarized Koch Fractal boundary microstrip antenna for communication purposes, specifically for facilitating broadband communication. - The antenna must operate within the ultra high frequency (UHF) range. Skills and experience: - Antenna design and fabrication - Knowledge of ultra high frequency propagation - Expertise in broadband communications technology - Experience with Koch Fractal geometry in antenna engineering

I am looking for a highly experienced and knowledgeable mechatronics tutor who has experience in Automotive R&D and exposure to Industrial/Production. The ideal candidate for this opportunity is one with advanced expertise in mechatronics 1) Teach me basic and also enable me to be able to look the design,understand and suggest Industrial improvements. 2) Review the Design and suggest improvment

I require a proficient team to design and engineer a 25 MW Organic Rankine Cycle (ORC) power unit. This unit will be primarily deployed for electricity generation. Key Functions: - The power unit will harness geothermal heat as its main source of energy. - The location of this geothermal heat source will be a drilling site—not a volcanic region, or a hot springs area. Ideal Candidate Skills and Experience: - Should have a solid background in thermal engineering, particularly ORC power units. - A thorough understanding of geothermal heat extraction techniques is essential. - Prior experience in designing large-scale ORC units for electricity generation will be highly advantageous. - Knowledge of the safety and environmental implications of drilling for geothermal heat is crucial. ...

I'm looking for an architect to design building plans for an 18 foot habitation box for my expedition vehicle, ensuring it's equipped with all necessary systems for a comfortable journey. Key Points: - **Power System:** It's crucial that this habitation box has a reliable and versatile power system. I need it to include solar panels, a battery bank, and a generator. The architect should ensure that these systems are integrated seamlessly within the design, considering factors like space, weight distribution and ease of access for maintenance. - **Water System:** The design should factor in space and weight considerations for the habitation box's water system. I'd like to have a freshwater tank, greywater tank, and a water filtration system included. The architec...

I'm currently seeking an individual who is not only proficient in VHDL coding but also in Quartus design implementation. Key Responsibilities: - Work on specific tasks related to VHDL coding - Implement design using Quartus While the overall aim of the project and the timeline aren't specified yet, I am eager to work with someone who is flexible and can adapt as per project needs. The ideal candidate for this role should be based in Pakistan, knowledgeable in FPGA programming, dependable, efficient, and proactive when it comes to troubleshooting and problem-solving.

I'm looking for a proficient Arduino engineer to integrate and build a project revolving around proximity sensor integration. This project is centered around a 6 sensor counter setup. The ideal skills and experience for this job would include: -Strong knowledge in Arduino -Experience in sensor integration, specifically proximity sensors -Understanding of data logging and its applications Responsibilities will include: -Programming the Arduino to reflect sensor integration -Developing a setup to add 6 proximity sensors together into one counter -Assuring that data logging works optimally with the integrated sensors If you possess these skills and believe in delivering quality work, please submit your proposal. I look forward to working with you.

I need an expert in CV writing to help update my CV. The updates will focus mainly on: - Work Experience: I want to highlight the most recent jobs only. Please articulate the roles and responsibilities in these positions in a clear, concise and professional manner. - Skills: The focus should be on both hard and soft skills. Detail my mechanical engineering skills and balance them with my soft skills. A freelancer with experience in recruitment or human resources particularly in the field of engineering is highly preferable. Extensive knowledge in crafting compelling narratives for CVs would ensure the final output showcases my value and expertise effectively.

I'm in need of a talented and experienced mechanical engineer who can assist me with design and drafting tasks, as well as failure analysis and troubleshooting. Key responsibilities will include: - Designing new components - Drafting detailed engineering designs - Conducting failure analysis - Implementing troubleshooting strategies Although I'm open to working with engineers at various stages in their career, an understanding or experience with the latest design and analysis technologies would be advantageous. Please provide detailed examples of previous relevant work in your application. While the purpose of the project has yet to be determined, there is potential for future collaboration for product development, system analysis and optimization, or equipment design ...

I need help routing an allwinnder D1 SoC to DDR3 RAM and rout the PMICs. You should be proficient in length matching and proper KiCad design. You must review the schematic to ensure there are no issues before you start routing. I'm seeking a proficient PCB designer with experience in KiCad for the development of a multilayer circuit board intended for consumer electronics. Key Points: - The project involves the creation of a multilayer PCB targeted for consumer electronics. Prior experience in this field would be highly advantageous. - Proficiency in KiCad is essential. Prior experience working with KiCad for multilayer PCB designs is a must. - You should have a good understanding of the manufacturing process for consumer electronics PCBs, including the constraints and requirements...

I require assistance with creating a Neural Network using Matlab, specifically designed to recognize and keep track of a truck's speed and acceleration performance. The aim of the project is to support monitoring driving safety and efficiency. Ideal Skills and Experiences: - Strong foundation in Matlab operations and functionalities - Deep understanding of Deep Neural Networks and its uses - Knowledge in performance matrices for vehicles, specifically trucks - Previous experience in Image Recognition - Proven track record in similar projects

I'm looking for an experienced automotive technician to replace the damaged PATS SCP control module on my Ford Scorpio 1996 petrol 2.0i 16v. Ideal candidates should possess experience in automotive electronics, specifically with ECM, and a strong understanding of Ford's PATS SCP control modules. Your previous work with similar Ford models will be highly advantageous. Please have your own tools, as I will only provide the replacement part. Ensure your bid not only accounts for your time and effort but also any ancillary costs. Also, propose a timeline for the completion of this task. Your capacity to deliver timely and quality results will be a determinant for this job.

I need an experienced firmware engineer to work with the Nordic nRF52833 chip and handle Bluetooth Low Energy (BLE) functionality. Key Responsibilities: - Develop and implement BLE functionality for data transmission to smartphones - Advanced PCB design skills are also a must for this project Ideal Skills and Experience: - Proficiency in Nordic nRF52833, BLE development, and PCB designing - A proven track record of implementing successful BLE capabilities for data transmission to smartphones - PCB designing experience at an advanced level Please note that this project requires a deep understanding of both firmware development and PCB design. Experience with similar projects will be considered a significant advantage. Your ability to deliver high-quality and reliable code is paramount. ...

I'm looking for an experienced individual to help with an audio breadboard project focused on low frequency tone decoding. The main goal of this project is to trigger an external camera circuit via an analog signal. Key Project Requirements: - Low power stand alone circuit to trigger a camera - Build a mic from parts, i.e. electret, cap, and resistor, that can pick up in the 22Hz range - Amplify the signal with a common amp chip (i.e. LM 386) - Amp needs to work with existing tone decoder circuit that works. Ideal Skill Set: - Proficiency in Low Frequency Signal Processing - Experience in Audio Breadboard Projects - Understanding of Analog Signal Transmission - Comfortable walking me through this online, via video interaction after schematics draw uo This is an interesting and chal...

I'm in need of a proficient and experienced electrical engineer to design an analog audio circuit for mixing multi-channel signals sourced from line level feeds. This will require expertise in designing robust and low-noise analog audio circuits capable of dealing effectively with multiple audio inputs. Ideal Skills and Experience: • Proficiency in electronic circuit design, specifically analog audio circuits. • Experience with handling multi-channel signals. • Familiarity with line level audio signal processing and mixing. We need an engineer with deep experience in high-end analog circuit design using low noise operational amplifiers. We will provide basic diagrams and objectives. The project involves high quality op amps and line drivers for an audio routing proje...

I am currently seeking an Arduino expert to enhance a project focused on indoor people detection. The primary objective involves refining a photoelectric sensor system. Key project requirements are as follows: 1. Specific functionality: The system must accurately detect and identify individuals within an indoor environment. 2. Sensor sensitivity: The sensors should effectively detect people while minimizing false positives caused by small, irrelevant objects. The ideal candidate for this project should possess: Extensive experience in Arduino-based development, particularly with photoelectric sensors. Proficiency in testing the system for accurate people detection and troubleshooting any potential issues. Knowledge of human body detection algorithms and sensor tuning would be highly ad...

I'm searching for an expert in environmental engineering with a focus on air pollution control for a predominantly national scale project. Here's a breakdown of the project: -A detailed understanding of modern air pollution control methods and techniques. -Building effective pollution control constructs on a national level. Ideal skills and experience include: -Environmental/engineering master degree specializing in air pollution control -Experience with large-scale pollution control projects -In-depth knowledge of national pollution standards and laws -The ability to develop efficient and practical solutions to air pollution issues -15 years experiences or above is perferrable I look forward to groundbreaking contributions in controlling air pollution nationally.

I am seeking a registered Texas PE (Professional Engineer) or Licensed Firm to endorse Structural and Electrical drawing that has been completed for a Steel Modular Building.

I'm seeking an experienced engineer/product designer that could build a 3-wheel E-Bike controller. This E-Bike controller should be capable of handling the following features: - Speed Control: The controller should have functionality to manage speed, with a maximum limit of 20 mph. - Battery Monitoring: The controller must include a system that allows for the continuous tracking of a Lithium-ion battery usage. - LCD Display: The controller should be equipped with an LCD display that visualizes the battery status and speed settings. It is essential the freelancer working on this project has experience in product design and engineering, with a strong familiarity in Lithium-ion batteries and how they function within e-bikes. Knowledge of LCD functionality is also necessary. Your attent...

I require an experienced PCB design engineer. The project involves designing a PCB, but the specifics of the design (such as the number of layers, purpose, dimensions, and form factor) have not been finalized yet. I'm seeking an expert who can guide me through the design process, and help in finalizing these parameters. Your role will be to: - Work with me to determine the type of PCB design (single layer, double layer, multi-layer) - Collaborate on the purpose of the PCB design, whether it's for prototyping, production, or circuit optimization - Help define the specific dimensions and form factor for the PCB Skills and experience needed: - Proficiency in PCB design software (e.g. Altium, Eagle, KiCad) - Experience with designing various types of PCBs (single, double, multi-la...

I am looking for an expert in electrical design to assist me with a project I have. The scope and areas of expertise are quite broad and I'm open to input from professionals in the field. The ideal candidate should have experience in: - Circuit design - Power distribution - Control systems The end goal of this project is to maximize the efficiency of the electrical systems we have in place. This may involve improving energy efficiency, upgrading existing systems, or designing new systems from scratch. I'm looking for someone who is detail-oriented, has excellent problem-solving skills, and a good understanding of electrical engineering principles. The ability to work independently and communicate effectively is also key. If you have experience with similar projects and can b...

I am in need of a skilled mechatronics industrial engineer who can Coach me and help me in : - support proof of concepts - Support Design Reviews in improving the industrialization - Look into the EE,ME design and suggest improvement in Design phase to avoid problems in production - Support PFMEA/MFMEA for testers and flashers First task is to educate/Coach me in this domain. 2nd Step would be to review design and suggest improvements. Work is on demand basis.

Hello All , I want you to design a small machine which will clearly show the power consumption of a hub bearing , when hub bearing is rotating at 300 rpm or less . The power consumption of the bearing can be shown through a digital meter or oscilloscope. I need to compare the power consumption of various hub bearings . In this , you can measure torque of hub bearing and that torque of hub bearing can be converted in to ampere or other which will clearly show the power consumption . For your reference I have attached herewith the hub bearing , which required to be tested ; in attached document. Hub bearings have two flanges . I want you to fix one flange by some method and rotate other flange at 300 rpm or less . Scope of the project : 1. Detailed component and assembly drawing of the mac...

I am in need of a skilled draftsman to help in the production of a few key hardware parts for secondary power distribution. These include mid span brackets, wire spreaders, wire spacers, and bucket truck tools. You should have a good understanding of the requirements for these parts and be skilled in drafting. Experience in the power distribution industry will be a plus. I need this project to be completed within 6 months. Key deliverables will include detailed and accurate drafts that can be used for production. The drafts should be precise and to scale, ready for fabrication.

I'm in need of an experienced team in India to manufacture smart home and industrial automation devices. The ideal candidate should have the following skills and experience: - Proficient in manufacturing smart home devices with Energy monitoring, GPS tracking, and UHF AUTO ATTENDANCE features - Expertise in industrial automation device manufacturing - Experience in real-time monitoring, integration with existing systems, and data analytics for industrial automation devices Please let me know your relevant experience and your proposed approach for this project.

My project involves the setup of an IoT device that will monitor our electricity usage every minute. The primary goal of this device is to help us keep a track of the electricity being consumed and understand how and when it is being used. The device should monitor two primary aspects: - Total energy consumption or - Real-time power usage Ideal skills for this project include: - Proficiency in IoT development - Experience in energy consumption monitoring systems - Knowledge of real-time data collection - Strong understanding of electricity usage - Ability to design and implement a real-time monitoring solution - Excellent communication skills to explain the device workings - Ability to work effectively as part of a team Please provide your experience in this area and how you plan to app...

I'm in need of a circuit that can regulate voltage to 6VDC, with a max current of 500mA. This circuit will be powering LED lights and should be compatible with an input voltage range of 12-24VDC. The circuit should also account for the presence of 4 diodes. - 4 Diodes - forward V - 8V limit to 7V max - max operating current 500mV - inline switch to turn any of the diodes in circuit on/off - need an LED in line for each Diode if active or blown ( when diode fails it is shorted 1ohm) Key requirements and considerations include: - Voltage regulation: The primary functionality of the circuit is to regulate input voltage to 6VDC for optimal LED power. - Current capacity: The circuit should handle a maximum current of 500mA, ensuring the LED lights operate efficiently. - Input voltage ...

Greetings, We are assembling a dynamic team and currently seeking 4-5 proficient Electrical Engineers to join us for a long-term collaboration. This opportunity is ideal for individuals with expertise in electronics, power systems, and communication systems. Key Requirements: - Strong command over MATLAB for data analysis, simulation, and modeling. - Proficiency in VHDL and Verilog for hardware description and digital circuit design. - Experience with multisim or similar simulation software for circuit analysis and design verification. This collaboration offers an exciting chance to work on diverse projects spanning electronics, power systems, and communication systems. We are committed to fostering a collaborative environment that encourages innovation and professional growth. If you ...

I'm in need of a skilled electrical engineer who can handle the installation of an electrical system, focusing primarily on security systems. The successful candidate should have experience in: - Electrical system installation - Security systems installation - Strong knowledge of electrical components and their purpose This project is focused on a single property, which may be residential, commercial, or industrial. I'm seeking a professional who can execute this task efficiently and with high attention to detail.

I'm in need of an experienced freelancer to help me find and purchase semiconductors from my preferred supplier. - **Scope**: The task involves global sourcing, meaning the freelancer should be well-versed in navigating a wide range of international electronics markets. - **Skills**: Expertise in electronics components, knowledge of the semiconductor market, and experience in global procurement are crucial. - **Ideal Candidate**: I need someone who has prior experience in sourcing electronics components and has an established network with distributors and manufacturers across the globe. Please get in touch if this project aligns with your skill set.

We are seeking an experienced electrical engineer to design a multi-output power supply for a portable AC servo drive. The ideal candidate will have expertise in power electronics and PCB design, with a proven track record of creating efficient and compact power solutions. Input Specification: 220Vac. Output Specifications: Two sections are required: Power Ground Circuit: +15V, +5V. Lower Ground(controller) Circuit: +12V, +5V, +3.3V, -12V. The design must be lightweight and compact, suitable for a portable device. We need the design to be highly reliable and efficient, with considerations for safety and durability. Job Responsibilities: 1) Design: Develop a schematic and board layout for a multi-output power supply that meets the specified requirements. 2) Prototyping: Assemble and te...

I'm in need of a skilled electrical engineer to help me set up a radio-based surveillance system in my property. - I have yet to decide whether the system will be placed indoors, outdoors or both so your prior experience in both environments is desirable. - The project does not have a predetermined number of areas or rooms that need covering, so I'm looking for someone who can help me plan and implement the system in the most efficient and effective way. Ideal candidate should have experience in: - Design and installation of surveillance systems, particularly radio-based systems. - Ability to work with both indoor and outdoor security setups. - Planning and executing a system across multiple areas. Your insights and recommendations regarding the best way to proceed would be...

I am seeking an experienced Arduino coder for my robotics project. The primary task involves coding for a robot that specializes in collecting tennis balls from the ground. Key tasks and responsibilities: - Sensor-based detection: The robot needs to be able to identify and pick up tennis balls from the ground using sensors. Your code should enable the robot to execute these functionalities efficiently. I prefer if you have: - Proven experience in coding with Arduino, especially in robotics. - Detailed knowledge and experience in sensor-based detection systems. Your role in this project is vital for the operational success of the robot. Please only bid if you're confident in your ability to meet these requirements.

I'm working on an industrial automation project and currently at the prototype development stage. I'm seeking a professional to assist with specific circuit design tasks. Key Responsibilities: - Circuit design focused on industrial automation application Ideal Skills and Experience: - Proven experience in hardware design, particularly for industrial automation - Proficient in circuit design for prototypes - Knowledge of industrial automation standards and requirements This project offers an exciting opportunity to contribute to an innovative industrial automation solution.